Look for this banner! 2 Nov, Old Spitalfields Market London
GORGEOUS French velvet ribbons
bags, like this, ALL from vintage fabrics & haberdashery
does this look 30s to you?
ALL those buttons & fabric are vintage!
Samantha of Ultimate Vintage Upcycle reports, “Have been moved to stall number 38 for Spitalfields Market on Saturday. We should be easy to spot as it will look like an explosion in a paint factory COLOUR COLOUR and a tad more COLOUR!”
Everyone near London head over, give Samantha a hug, & start looking at the buttons, ribbons, vintage upcycled items, ribbons, laces, and haberdashery from across Europe over the last 100 years.
WOWser, has she got gorgeous things! Do send us a piccie of your finds.
When I saw the name of the pattern, I immediately remembered a great actress from the movie, Crossing Delancey. Her character’s name is Bubby, as in hubby. Her character is the quintessential Lower East Side New York Jewish grandma, and brings life to the movie. In the trailer above, there’s even a quick scene of her wearing an apron, although not quite this style.
It’s a good think I had more than a yard of each fabric, as the ties still had to be cut, and I’d already decided I wanted larger pockets, and they also had to be cut. I wanted a bow for 1 closure, and that was extra, too, but I managed not to need to piece it. Oh – just realized I might have tried a bow cut on the bias. Wonder what that would have been like… next time! Do see the photos in yesterday’s post so you can see.
My advice: if you’re making this, have at least 1.5 yards of 45” fabric on hand for each side, and don’t plan to make it any wider!
At this point, I disregarded the remainder of the instructions, but had read them through once to be certain it was a normal construction.
First, I sewed the shoulder seams together for both sides, instead of leaving them open. That was a design choice of mine, as I wanted longer straps without any closures. Being a reversible apron, I did some things in bits, such as sewing along the lower edges, across the bottom, and back up the sides, starting and stopping at the markings for where the ties were to be inserted. That left the upper halves and necks still open, but shoulder seams done and holding things together somewhat.
I wanted to insert one of the bands and double-check the fitting, and once that was done, I went ahead with sewing up that side of the pinny’s outer edge on that side only. That I did after ironing the 2 fabrics carefully, matching up the lower, already stitched and top stitched pieces. As I got up toward the shoulder area, I wanted to make certain everything would fit smoothly, so I took extra care by ironing those seams ahead. Also made the top stitching much faster. 😉
Once the bottoms of both sides were sewn on the inside and I’d turned them right side out, I did the top stitching. More on that below. I chose not to try doing anything more from the inside of the pinny when moving up to the shoulder areas. Just too complicated for me, and the fabrics seemed to be matching up extremely well, so I ironed and top stitched, still with that little edge of the lighter fabric showing on the darker side. Am not a fan of binding on every apron!
With 1 side completed, I got to play around with a bow. Decided to use a 4” scrap piece of both fabrics (cutting the pattern out identically meant I had identical scraps, too – hehee!) Don’t know how long they are, I just went with what looked right. i really thought I’d line the bow, too, but once I had one cut and tied I realized double thickness was too heavy and thick.
But I did like the concept of some sort of gather, so did the 2 pleats when inserting the bow ties into the apron, folding them from 4” down to 2” using 2 pleats, measured by eye. Then I completed the top-stitching of that side of the pinny, measured and ironed before inserting the bow ties.
I really did have more fun than I’d thought rolling the lighter side of the fabric over to the darker side while top-stitching around everything, and it didn’t take nearly as long as I’d imagined.
That left the neck, which had to be re-cut, as I knew I’d drive meself crazy trying to get a V-neck to match on all 4 pieces of cloth. It got rounded right quick, seams ironed first to be sure both sides fitted neatly together, then stop stitched. Ironing took a bit of imaginative folding, to get each side flat up around the shoulder straps, but that fabric affinity worked in my favour and kept everything neatly in place for ironing.
Just realized that I could have reversed some of the pocket pieces, and lined each side with the other… another variation for next time!
Have pinny, can bake ~ weather’s about right for the first batch of Autumn scones, and Samantha’s just sent me her mum’s fav recipe… Anybody ready for tea & scones with jam?!
There are only 3 pieces for this pinny: the body, a self-lined pocket, and side ties. I had trouble figuring out the tie from what got printed from the downloaded PDF, so just used the 1 piece I had clearly marked, and made up another, longer tie for the bow. Thought long streamers on both sides would be too much frou-frou, and get in my way.
I started with what the directions said:
“1. Fold 45 inch fabric so that selvages meet in the center of the fabric. 2. Fold fabric again to bring left hand fold to meet the far right hand fold. This will give you two folded edges on the right hand side, which will become the center back for the pattern pieces. This will allow you to cut through multiple layers and not waste fabric.”
Here’s what I did, not being patient enough to faff about putting my two cottons together and doing this only once, and also knowing I needed a more fool-proof way to be certain my folds would have both sides equal ~
click any photo for slide show & captions
I cut off the white selvage from the one side of each fabric. Have you noticed – fabric used to be woven with selvages on both sides, and now only 1 side’s left plain, for manufacturing info? Know I read somewhere about this, but only remember the bit about selvages now being woven differently with no need to be cut off. Anybody else know about this?
Back to the pinny ~ I carefully folded the fabric in half and ironed the center firmly, with steam. That gave me the center, ironed all the way down the fabric, as a marker.
Then I opened up the fabric to full width and folded each selvage to the center. I remembered to measure – ta-da! Just to be certain the 2 halves were equal. They were. Then I ironed the fold on each side.
Once that was done, I folded one folded side over to the other. I now had both folds together. I ironed that, too. Then I placed the pattern piece onto the fabric and found it only just fit. No room to spare, and I hadn’t made any changes to it in width, but was thinking I might. Uh-uh! If you want to, you’ll have to either piece it, or use wider fabric!
I repeated this with the second fabric, then put them together. My relatively new pinking scissors wouldn’t cut through all the layers, but the fabrics had great affinity for each other. In other words, they stuck together really well, even when I didn’t want them to.
Decided to just cut out each side separately, as the cottons are medium weight, not light summery voiles. For the second fabric, I simply laid down the first already-cut fabric and it stuck almost like glue whilst I cut out the second fabric. Much easier than using the paper pattern, which didn’t stick at all!
Will have to continue this tomorrow, for final thoughts and more photos!
I’ve been looking for the quintessential (for me) apron pattern for some time, having none in my pattern stash. Unless you count the dim, distant memory of using a yard of 36” wide cotton that was my first sewing project in school home economics class a bazillion years ago. Ugh. Talk about uninteresting projects, all of which would make it a very unlikely project for this month’s Vintage September on the Monthly Stitch. Right? Not necessarily…
“Vintage” allowed too much to choose from, and uncooperative weather left me totally undecided. Until last week, when I stumbled upon some free patterns online at fabric.com. One, from a man on staff, was a pattern for an apron his grandmother had made and he contributed it in her memory. Hmm. Remembering my apron need, I realized it might just do…..
However, I did make a few revisions, and the method for cutting it out deserves a post all it own. Click back tomorrow for that once!
mid-creation, with 1 side band in place, but still that too-V neckline
the reversible band on one side
those shoulder seams were ironed in opposite directions, to reduce bulk
my glamorous circle “pattern” (my plates are square)
for top stitching, used light bobbin (for that side) and red top threads (for darker side)
ties for the bow
The neckline had to be lowered. Notice in earlier photos it looks almost V-necked. Once I started doing all the edge stitching I quickly decided the V wouldn’t work, so I modified it. However, i did stick with rolling the lighter side of the fabric over to form a tiny edging on the floral side.
I also made the pockets wider, and repositioned them according to my own arms’ length. Decided to get a bit frilly with one pocket on the floral side, giving it an eyelash trim, but decided that really didn’t show against the eye-watering print, so didn’t add to the other side. The beige side’s pockets I left widened but plain. The pattern called for self-fabric lining for these patch pockets, and the cottons were heavy enough, so I didn’t both to use any interfacing anywhere on the pinny.
In addition to lowering the neckline, I lengthened the shoulder area slightly and cut it into more of a strap and omitted both button & popper closures. I felt both might be a little wearing on my shoulders. Also omitted them on the side closures, as I didn’t want to have to fiddle.
Bows are nice, and I do like them as long as they’re not tight around me middle, so I decided to cut my own generous width for the left side closure. I cut 4″ strips as long as the leftover fabric was, hemmed them all the way round, and angled the bottoms. When placing them in between the 2 sides I made 2 pleats, pointing them downward so no flour could get into the folds. That made them about 2″ wide. At first I considered making the ties reversible, too, but decided the doubled fabric would be too thick and heavy for a perky bow.
Everything fits, I can get into & out of it easily, and now I have a pinny! The cutting process will follow tomorrow – how to fold thrice and cut once!